Home / Padel court cost

Cost guide · Updated 2026

The kit is not
the cost

Padel court construction cost in the United States plans at $40,000 to $75,000 for a finished outdoor court, while the court kit that manufacturers advertise typically quotes at $20,000 to $30,000. Everything between those two numbers is the part nobody puts on a brochure.

This page breaks the padel court cost into its parts, explains which ones move and by how much, and gives you a calculator that does the arithmetic for your project.

Padel court construction cost calculator

Padel court construction cost calculator

Planning ranges, not a quote. Adjust the inputs and the numbers update. Nothing is gated and no email is required.

—

Estimated total project range

    Planning guidance only. Excludes land, site access works, utility runs to the court, fencing beyond the enclosure, seating and any building shell.

    Where the money goes

    Where does the money actually go?

    Roughly half the finished cost is the court kit. The rest is ground, freight and labour, and that is the half that varies most between two apparently identical sites.

    Cost split of a finished outdoor padel court A horizontal bar divided into five parts: court kit, slab and drainage, freight and customs, installation labour, and lighting with engineering. The court kit is the largest single share at around 45 percent but under half of the finished cost. FINISHED OUTDOOR COURT, TYPICAL PLANNING SPLIT Court kit ~45%$20k–30k Slab, drainage ~20%site dependent Freight, customs ~15% Install ~15% Lighting ~11% Proportions are planning guidance derived from published kit and finished-court prices, not quoted line items.
    Fig. 01 — The kit is the part manufacturers advertise. It is rarely half the finished number.

    How much does it cost to build a padel court, line by line?

    Per court, for a single outdoor court on reasonable ground. Multi-court projects reduce most of these on a per-court basis, which is covered further down.

    Method: ranges compiled August 2026 from published US installer quotations and international project cost guides. Kit figures are factory-gate prices. Treat the intermediate lines as planning proportions rather than quoted items, and expect real quotes to redistribute them.
    Line itemTypical rangeWhat moves it
    Court kit, ex works$20,000–30,000 Panoramic vs standard, glass thickness, steel gauge, country of manufacture
    Sea freight and inland haulage$3,000–8,000 Origin port, container count, distance from US port to site
    Customs, duty and brokerage$1,500–5,000 Tariff classification and prevailing duty rates
    Reinforced slab and drainage$8,000–20,000 Ground conditions, fall, excavation depth, whether a slab exists
    Installation labour$6,000–15,000 Crew travel, court count, access for plant
    Lighting and electrical$4,000–10,000 LED spec, pole count, distance to the panel, whether night play matters
    Engineering, permits, survey$2,000–8,000 Wind or seismic zone, jurisdiction, coastal exposure
    Section through a padel court base build-up Build-up from the bottom: compacted subgrade, compacted aggregate base, reinforced concrete slab, then artificial turf with silica infill. The slab is laid to a fall for drainage. Ground conditions, required excavation depth and drainage determine most of the variation in groundwork cost. Turf + silica infill Reinforced slab Compacted base Subgrade FALL TO DRAINAGE Excavation depth, ground bearing and drainage decide most of the groundwork cost, not the court.
    Fig. 02 — Everything under the turf. This is the line item that varies most between two sites three miles apart.

    The question that separates comparable quotes: ask which Incoterm the kit is priced on. A price quoted EXW is at the factory gate and leaves freight, insurance, duty and haulage with you. A price quoted DDP has them included. Two numbers that look $8,000 apart can be identical.

    Is it cheaper to buy a US-made court or import one?

    It depends on which lines you are willing to carry. An imported court usually has a lower factory price and adds sea freight, customs duty, brokerage and inland haulage. A US-manufactured court prices higher at the gate and deletes those four lines entirely, along with the lead time and the currency risk.

    Domestic manufacturing is no longer a niche. Several US builders now manufacture in the United States rather than importing, which means there is no overseas coordination, no container to track and no customs hold to plan around. On a single court the totals often land close together. On a four-court project the domestic route usually wins on schedule certainty even when it loses marginally on price.

    Ask both sides the same three questions: what is the ex-works or ex-factory price, what is the delivered price to my site, and what is the lead time from deposit. If a domestic quote and an imported quote are within ten percent delivered, take the one with the shorter lead time.

    What makes one padel court cost more than another?

    Four things account for most of the spread, and only two of them are choices you make.

    • The ground. The largest uncontrolled variable. A flat, well-drained, already-levelled site can save five figures against a sloped or soft one. This is why converting a redundant tennis court is often the cheapest route: the expensive groundwork is already paid for.
    • Which model you specify. There are four, not two: classic, panoramic, full panoramic with no corner posts, and climate-rated for wind and salt. Each step removes structure and adds engineering, and the price climbs with it. They all play identically, so this is a decision about sightlines and durability rather than the game. It is the largest controllable item in the kit.
    • Where it is manufactured. Spanish and Italian courts generally price above Asian ones, with differences in steel treatment, glass sourcing and warranty terms behind the gap. Cheaper is not automatically worse, but a galvanising specification and a warranty you can actually enforce in the US are worth reading closely.
    • Wind and seismic engineering. A coastal Florida site and an inland Texas one are not the same structural problem. Hurricane-zone anchoring adds cost that has nothing to do with the court and everything to do with the county.

    What is the padel court installation cost indoors?

    The court itself costs about the same as an outdoor one, and the building costs more than the court. Indoor projects are a property question with a court attached, not a court project with a roof.

    If you are fitting courts into an existing building, the padel court installation cost is broadly the outdoor figure minus some weather-related groundwork, plus indoor lighting and any floor preparation. If you are constructing the building, the shell, roof, fire protection and HVAC will exceed the court budget, usually by several times.

    Before you cost anything indoors, measure the clear height. The International Padel Federation requires 6 metres, about 19 ft 8 in, clear across the whole court with nothing intruding, and recommends 8 metres for new facilities. Trusses, sprinkler mains and duct runs all count. More warehouse conversions die on that number than on floor area. The full figures are on the court dimensions page.

    Which court model should I specify?

    Manufacturers name their models differently, but the US market sorts into four types, and the choice moves the kit price more than anything else you control.

    Model names vary by manufacturer. Ask which of these four a quoted product corresponds to rather than comparing brand names.
    TypeWhat it isBest for
    Classic or club Standard enclosure with corner posts. Modular, designed to be repeated across a multi-court site. Clubs scaling to several courts, residential courts, the value option
    Panoramic Reduced corner structure and larger glass panels for cleaner sightlines. Heavier engineering. Facilities that will photograph or broadcast the court
    Full panoramic or infinity No corner posts at all, uninterrupted 360-degree view. The most structurally demanding and the most expensive. Show courts, tournaments, premium clubs, indoor venues
    Climate-rated Built for a specific environment: wind, salt air and extreme heat, with upgraded coatings and anchoring. Coastal Florida, the Gulf, anywhere within sight of salt water
    The four padel court model types compared Corner detail of four court types. Classic or club courts have a full corner post. Panoramic courts reduce the corner structure. Full panoramic or infinity courts have no corner post at all and use larger glass panels. Climate-rated courts use the classic structure with upgraded coatings and anchoring for wind and salt exposure. CLASSIC / CLUB PANORAMIC FULL PANORAMIC CLIMATE-RATED Corner posts.Modular, best for scaling. Reduced cornerstructure, cleaner sightlines. No corner post.Largest glass, show courts. C5 coating,upgraded anchoring for wind and salt. All four play identically. The difference is sightlines, durability in a given climate, and how easily you add courts five to eight.
    Fig. 03 — Manufacturers name these differently. Ask which of the four a quoted product is, rather than comparing brand names.

    All four play identically. The differences are sightlines, longevity in a given climate, and how quickly you can add courts five through eight. If you are building on the coast, the climate-rated option is not an upgrade, it is the specification.

    Does the cost per court drop if I build several?

    Yes, meaningfully. Freight, crew mobilisation, engineering and permitting are largely fixed per project rather than per court, so the second and third courts cost less than the first.

    A four-court club will not cost four times a single court. The kit scales close to linearly, but a single container can often carry more than one court, one crew trip covers the whole build, and one set of drawings satisfies the same jurisdiction. That is why a club-scale project often prices better per court than a homeowner's single court on an awkward plot.

    Common questions

    Padel court cost, answered

    How much does a padel court cost in total?
    Plan on $40,000 to $75,000 for a finished outdoor court in the United States, with premium panoramic structures, difficult ground or hurricane-zone engineering pushing above that. The court kit alone is $20,000 to $30,000 at the factory gate. Indoor projects are calculated separately because the building is funded before the court.
    What is the padel court construction cost per court on a multi-court project?
    Lower than a single court, because freight, crew mobilisation, engineering and permitting are largely fixed per project. Expect the second and subsequent courts to price meaningfully below the first. Ask any builder to quote both the total and the per-court figure so you can see where the scaling actually happens.
    Why is one quote so much cheaper than another?
    Usually because they are pricing different scopes. One may be the kit at the factory gate and the other a finished, permitted, lit court on a new slab. Establish the Incoterm, who is responsible for the slab, whether lighting is included, and who carries the permit application, before treating two totals as comparable.
    How much to build a padel court on bare ground versus an existing slab?
    Bare ground carries the full slab and drainage line, commonly $8,000 to $20,000 depending on fall, excavation depth and soil. An existing slab in sound condition removes most of that, which is why the same court can land near the bottom of the range on one site and near the top on another three miles away.
    Is it cheaper to convert an existing tennis court?
    Often yes, because the land, levelling and drainage already exist and groundwork is the largest uncontrolled cost on a new site. A tennis doubles court at 23.77 by 10.97 metres is larger than a padel court in both directions, so one court fits. The slab still needs surveying for condition, level and load capacity before anyone quotes.
    What is the cost of building a padel court versus buying the kit?
    The cost to build a padel court end to end runs $40,000 to $75,000 outdoors, and the cost of building a padel court is the same question asked differently. The kit on its own is $20,000 to $30,000 at the factory gate. The gap is groundwork, freight, customs, installation labour, lighting and engineering, and it is the half that varies most between two apparently identical sites.
    What ongoing costs should I budget after the build?
    Silica infill top-ups and turf brushing on a regular cycle, glass cleaning, occasional panel replacement, net and light maintenance, and turf replacement roughly every seven to ten years depending on use. None of these are large individually. Budgeting nothing for them is the mistake.
    Do you charge for the cost breakdown or the introduction?
    No. Everything on this site is free to read and nothing is gated. Builders holding a region pay a fixed monthly fee for territory access, which funds the site. Because that fee is fixed rather than charged per enquiry or per contract, nobody here benefits from you building a larger project than you need.

    Read next

    Before you ask anyone for a number

    Specification

    Court size and clearances

    The 20 by 10 metre footprint and the indoor height rule that decides sites.

    Builders

    What to ask a court builder

    The questions that make two quotes comparable, and who covers your region.

    Start here

    How a padel court gets built

    Survey to opening, and where the four to nine months actually goes.

    Get a real number

    Have it priced properly

    The calculator gives you a range. A builder who has seen your ground gives you a figure. Send the site details and we will connect you with the one builder covering your region.

    Get your project priced